DW-STM108 Speed gate


prevnext

DW-STM108 Speed gate

产品分类: Quick access door
    Specification size: 1400 * 160 * 980MMSupport non-standard customization
    订购热线:0755-89358985
    详细介绍
    product manual:
    The rotation of the motor and the positioning of the gate are detected by high-precision photoelectric elements. The high-end 32-bit microprocessor is the core electrical control system, which makes the motor rotate more smoothly and the overall operation and control performance are more reliable.
    The quick opening and closing door responds quickly, and the speed of opening or closing a single door can reach 0.5s ~ 1s, which effectively improves the speed of passage. Passing speed can also be set online as needed, and can be adjusted fast or slow appropriately.
    The person or obstacle in the passageway detects the state of the passageway through the advanced concealed grating. After the card is valid, the door will automatically open the door after the speed is passed, and the person will automatically close the door immediately after passing the passageway to prevent the trailing behind.
    Anti-pinch function, one is that the swing door will not be closed when it is detected that someone or object is blocked in the area of the closing door, and the door will not close until the person leaves; When the door is closed, the swing door will be forced to pop open immediately to prevent the person from being pinched, and the sound and light alarm prompts are kept. Until the person leaves the passage, the swing door will automatically reset and work normally.
    To prevent illegal passage in the reverse direction, after swiping the door and swinging the door to open the door effectively, if there is someone passing in the reverse direction, the swing door will immediately alarm and automatically close. Speedgate has certain functions such as overcurrent protection to reduce damage to hardware equipment and movement. The fault alarm prompts that the traffic status light is green when the speed-pass door is in the normal state, and turns to red when a fault occurs, prompting relevant personnel to carry out detection and maintenance in time.
    Configuration
    Configuration instructions
    shell
    SUS304 stainless steel machine 2.0, some styles 1.7, machine stainless steel, satin wire drawing treatment
    Craftsmanship
    Laser etching and bending, the gap is even and small,
    Door material
    Tempered glass or plexiglass 8-12mm
    Movement voltage
    DC24V
    Infrared
    6-10 pairs
    Logical judgment
    Precise anti-trailing, anti-throwing hands, judging whether there are people in the channel, overtime alarm, pass back to the gate to meet more customer needs
    Anti-pinch
    Multiple infrared induction anti-pinch, mechanical anti-pinch
    Swing arm
    Acrylic / Tempered glass optional
    Movement structure
    Motor deceleration or clutch
    Motor
    servo motor
    Illegal intrusion handling
    Forcibly pushing open the automatic reset (automatically locked by pushing 10 degrees, automatically reset after the delay), while reducing damage to the swing door, it can effectively prevent pedestrians from forcing and alarming.
    Switch gate
    Multi-stage deceleration function, running more smoothly and quietly
    Position detection
    Angle encoder
    Automatically open when power off
    Manually push away
    voice system
    Optional

    Features:
    The use of industrial-grade 32-bit ARM chips leads the industry, reflects fast, and greatly improves processing power.
    Using electromagnetic clutch device.
    The angle detection and control through the angle encoder greatly improves the accuracy of the swing angle.
    After swiping the card, the swing arm opens, prompting the pedestrian to pass, and after the person passes, the swing arm automatically closes.
    When the swing arm is not opened, if it forcibly breaks in, the swing arm rotates at a certain angle to buffer, and then immediately locks; completely avoid the problems of the swing arm breakage and movement damage caused by the traditional swing gate.
    Anti-reverse, after swiping, only pedestrians are allowed to travel in one direction; if they pass in the opposite direction, an alarm will be issued, and in some cases the swing arm will be closed quickly.
    The speed can be adjusted according to the requirements of different places, and there is a dial switch for adjustment.
    After obtaining the gate clearance authority, if there is no gate clearance within the set time, the authority is automatically cancelled and the original state is restored.
    A few pairs of infrared are used to detect various traveling states.
    After the power is turned off, the swing arm is in a state of no resistance.
    Features
    Function Description
    Alarm function
    Illegal intrusion, trailing, passing overtime, device alarm when situation occurs
    Device adjustment function
    Through the built-in small dial on the main control board, the operating state of the programmable device and multiple working modes can be programmed
    Anti-pinch function
    Infrared and mechanical dual protection, thus effectively protecting the safety of pedestrians
    Anti-trailing anti-reverse function
    Two-way anti-reverse intrusion and two-way anti-trailing function (off gate or alarm handling optional)
    Anti-shock protection function
    When an external force strikes the swing door abnormally, or someone forcibly breaks in, the swing door can be opened 10 degrees slowly
    Automatic reset function
    ①Forcibly push open, push open 10 degrees, automatically lock, automatically reset after delay; ②After the normal credit card is opened, the system will automatically cancel the user ’s
    Automatic unlock function
    In case of emergency, the swing door can be pushed freely after power failure, in line with fire protection
    Fire alarm linkage function
    After receiving the fire alarm signal, the equipment will be opened unconditionally first
    Anti-shake function
    Infrared monitoring accurately distinguishes the passing of people and the blocking of infrared by walking and throwing your hands to prevent misjudgment of trailing or closing the gate
    Submerged return gate function
    After swiping the card, enter the anti-pinch area and then exit the channel, the gate is closed
    Multi-stage deceleration function
    The swing door performs uniform acceleration and deceleration control from the start to the stop of the switch bar to make the swing arm run more smoothly
    Product control
    ①Access control attendance ②Fingerprint recognition ③Spot ticketing ④Self-service customs clearance ⑤Visitors pass ⑥Can be directly controlled and managed through the management computer ... (For details, please call 0755-89358985)

    Name: Shenzhen Dongwo Intelligent Technology Co., Ltd
    Factory address: third floor, building a, jinxinpeng Industrial Zone, Jingong 1st Road, Guanlan dashuikeng, Longhua New District, Shenzhen (access gate and parking lot system)
    Address: Building D, Zhunyu Industrial Zone, Guanlan Junzi community, Longhua New District, Shenzhen
    Service Tel.: 0755-89358985 (line 20)
    24-hour after-sales service:
    Wang Gong 18318723831 (northern region)
    Zhanggong 13823369371 (southern region)
    Wang Gong 13528799566 (Office)
    R & D department: 0755-89358985 transfer to R & D department (non-standard customization and development docking)
    Complaint hotline: 0755-89358985-805
    Off duty business consultation: 18320819653 Mr. Yi 13510636243 Mr. Wu

    Message

    Contact us

    • HOTLINE:0755-89358985
    • Website:www.szdongwo.com
    • Weibo:http://weibo.com/3925596040
    • Address: floor 3, building a, jinxinpeng Industrial Zone, Guanhu street, Longhua District, Shenzhen
    Scan QR codeScan QR code