What is the difference between the speed gate and swing gate of the pedestrian passage gate!

Is there any difference between the speed-pass gate and swing gate of the pedestrian access gate? Dongwo Technology Co., Ltd., which specializes in producing speed-pass gates, can tell you directly that there must be a difference. That ’s right. The superior characteristics are realized by swinging left and right. In the final analysis, the speed gate is an upgraded version of the swing gate, which can be essentially different from the appearance, movement structure, product performance and so on.
A: Appearance
We can see the swing gates in many residential areas and office buildings. The swing gates are mainly set up to facilitate bicycles, electric cars, motorcycles, etc. The appearance of the swing gates is generally 280mm single movement, 300mm wide dual movement, and dot matrix The indicator light and the swing arm are mostly made of 304 stainless steel, and there is also a small amount of plexiglass. The overall appearance of the swing gate looks heavy. But when viewed outside the door, it is slender and looks light and gorgeous. The structure of the movement is small. The single movement is generally 150mm wide, the double movement is generally about 210mm, and the length is about 1500mm. The length can be determined according to the customer. The swipe window is slender and the indicator light is smaller. The swing arm is basically plexiglass or tempered glass. The swing arm drive rod is relatively thick and has a diameter of 51-63mm. From the outside, the production process and overall appearance are high-end and atmospheric.
The difference between them can be felt from the appearance, and the speed gate is tall.
B: Movement
The swing brake movement adopts sliding friction, the principle of four wheels and four slots, and the transmission efficiency is low. It is positioned at 90 ° by the wheel and the slot. Each time the swing arm swings, the groove wheel will slide friction once. The positioning is also determined by the dead mechanism. The swing arm In case of external force, if the anti-collision device is not added, the movement or the swing arm will be directly hit. If the swing arm deviates from the middle zero position, the two sides will not be aligned and out of sync. If the movement is not normal, the swing arm will bend. The motor uses a brush motor, and illegal intrusion can only alarm and cannot lock the brake. Ordinary swing gates must pay attention to the impact or injury.
However, the Dongwo Technology quick-pass door movement uses a solenoid valve clutch and an encoder for linkage. The motor has a high transmission efficiency, that is, a large transfer coefficient, which transmits the effective power of the motor to the swing arm to the maximum. The motor uses a brushless phone or servo motor. A brushed motor can be used. When the swing arm swings away from the zero position when a sudden external force acts, the solenoid valve immediately locks the brake to eliminate the external force. The encoder function directs the swing arm to return to zero position, forming an automatic reset. The valve will also immediately lock the gate, and there will be an alarm prompt to remind you to swipe.
The swing gate movement is not the same as the quick-pass door movement. One type has a long service life without friction, and the other has a short sliding friction life. The kinetic energy conversion efficiency is also different. In the future, Dongwo Technology will vigorously develop various series of fast-pass doors to meet the needs of the times. We must walk in front of the industry and slowly eliminate the current ordinary swing gates.

C: performance
Ordinary swing gates are not anti-collision, and the kick will definitely be damaged, which will seriously damage the movement. In addition, the control board is processed by 8-bit single-chip microcomputer. The opening speed is relatively slow. The passage of 20-25 people / min. Fire control requirements, no fire linkage function, ordinary swing gate and luggage, can only rely on the middle anti-clamp to handle whether there is a pass, peak pass can only pass one person and one card, can not continuously pass the card, there is no memory to open the gate Wait.
Dongwo Technology's quick-pass door has anti-collision function, and can automatically reset by kicking, plus the control part adopts 32-bit embedded microprocessor, the opening speed is very fast, 0.4-0.5 seconds / time, 35-40 people / Minutes, continuous card swiping, continuous gate opening, gate has memory function, and fire control linkage.
The intelligent processing of the speed pass door can know that when people and luggage (backpack or trolley case) pass through the gate, the speed pass gate will quickly open the gate after swiping the card, the luggage will not pass through, and the gate will not close the gate. Wait for the luggage (roll case) When the gate is completely passed, the gate starts to close. If someone breaks in during the gate closing process, the gate will automatically open, and the safety factor is very high. When the commuting peak period passes the scenic peak period, as long as the card generates a record, the gate will not The gates are closed to improve the traffic capacity. There are also tour groups passing the gates, and the number of cards swiped is exactly the same as the number of passers. The synchronization on both sides is good, and the opening and closing gates are consistent. The control part of the swing gate and the fast pass gate is good, just like the human brain, which is fast, flexible and stable.
Technology changes life, innovation leads the future, Dongwo Technology Company's channel gate industry is constantly innovating and making progress, winning the trust of our customers, making its own contribution to the security industry, and rewarding society.